Essex Electronics K1 Series Bedienerhandbuch PDF herunterladen (Seite 20)

Essex Electronics, Inc. | 805.684.7601 | 800.KEY-LESS | fax 805.684.0232 | keyless.com

System Programming

 Overview of System Code Programming

There are TWO levels of codes for the KE-265 system.

1. The Master Code (used to open the door and for programming

User Codes)

2. User Codes (used by personnel to open the door)

IMPORTANT: Notes to remember before programming:

1. All codes must be 3 to 8 digits.

2. All codes must be different from each other.

Note: 5-Pad Keypads have two digits on each pad.

The system reads these numbers as the same.

For example: 1-3-5-7-9 is the same as 2-4-6-8-0.

3. Do not program codes, which are part of other codes.

For example: User Code 1

1-2-3-4-5 and User

Code 2

1-2-3

4. During programming, the system resets after 5 seconds if a

number is not entered. Do not let more than 5 seconds elapse

between entries or the system will reset and you will have to start

over.

 Overview of the Master Code

Knowledge of the Master Code is the highest privilege granted to a

user of the KE-265 system. There is only one master code, which

is used to program each of the 5 User Codes. The factory default

Master Code, “1-3-5-7-9”, can be used for initial programming but

should be changed to a unique 3 to 8 digit code.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 35 36

Keine Kommentare

Modele	Rodzaj dokumentu
E12SS	Instrukcja Użytkownika Pitco Frialator E12SS User's Manual, 60 strony
E14B	Instrukcja Użytkownika Pitco Frialator E14B User's Manual, 12 strony
E14X	Instrukcja Użytkownika Pitco Frialator E14X User's Manual, 49 strony

Essex Electronics K1 Series Bedienerhandbuch Seite 20